GOOD FUTURE PROSPECTS FOR SOLAR THERMAL POWER PLANT

PROJECT DESCRIPTION PROJECT AT A GLANCE COST OF PROJECT PROFITABILITY AND NET CASH ACCRUALS ASSSESSEMENT OF WORKING CAPITAL REQUIREMENTS PROFITABILITY RATIOS, DSCR, DEBT EQUITY BREAK EVEN ANALYSIS MEANS OF FINANCE REPAYMENT OF TERM LOAN DEBT SERVICE COVERAGE RATIO DEPRECIATION CHART PROJECTED PAY-BACK PERIOD PROJECTED IRR PROJECTED BALANCE SHEET COMPANY SUMMARY REASONS FOR BUYING THE REPORT OUR APPROACH TABLE OF CONTENT FINANCIAL PLAN INFORMATION/ DISCLAIMER

PROJECT DESCRIPTION

The growing industrialization and associated use of energy have led the world to face energy crisis which is gaining serious concern day by day. In principle, solar energy can supply all the present and future energy needs of the world on a continuous basis. This makes it one of the most promising of the non-conventional energy sources. India has made marked gains in the construction of both hydro-electric and thermal power generating plants. Installed generating capacity has increased manifold since demand has increased at an even faster rate. Thus the burden of power generation is still on fossil fuels. Solar energy can play an important role in meeting energy demands in future years. Thus greater stress should be given on technical development for collection and storage of solar energy. If this solar energy is converted to electricity this can meet the growing demands. Thus Indian Industries will get a great benefit. Solar systems are powered by energy from the sun. Two generic types of solar-electric systems are solar photovoltaics and solar thermal electric. The direct utilization based on thermal and photovoltaic are of prime importance because it involves both storage and conversion into chemical as well as electrical form of energy. Solar thermal technologies convert radiant energy from the sun of thermal energy. For low-temperature applications (typically below about 200ÂºF [95ÂºC]) such as domestic water heating, concentration of the sunlight is not required. To achieve the high temperatures required for generation of electrical power, the solar energy must be concentrated. All solar thermal electric technologies include a collector, which redirects and concentrates the insolation on a receiver. In the receiver, the solar energy is absorbed, heating a fluid that powers a heat engine to generate electricity. In some systems, a heat exchanger may be used for power generation. Three principal solar thermal concentrator concepts are currently under development for power generation: parabolic trough, central receiver, and parabolic dish. The parabolic trough is the most advanced of the concentrator systems. This technology is used in the largest grid connected solar-thermal power plants in the world. A parabolic trough collector has a linear parabolic-shaped reflector that focuses the sun's radiation on a linear receiver located at the focus of the parabola. The collector tracks the sun along one axis from east to west during the day to ensure that the sun is continuously focused on the receiver. Because of its parabolic shape, a trough can focus the sun at 30 to 100 times its normal intensity (concentration ratio) on a receiver pipe located along the focal line of the trough, achieving operating temperatures over 400 degrees Celcius. A collector field consists of a large field of single-axis tracking parabolic trough collectors. The solar field is modular in nature and is composed of many parallel rows of solar collectors aligned on a north-south horizontal axis. A working (heat transfer) fluid is heated as it circulates through the receivers and returns to a series of heat exchangers at a central location where the fluid is used to generate high-pressure superheated steam. The steam is then fed to a conventional steam turbine/generator to produce electricity. After the working fluid passes through the heat exchangers, the cooled fluid is recirculated through the solar field. The plant is usually designed to operate at full rated power using solar energy alone, given sufficient solar energy. Flat Plate Collectors are the most common type of solar water heating systems for residential and commercial applications. Flat plate collector systems are used comfort heating of a home or commercial building in the winter and for domestic hot water production throughout the year. Flat plate collectors usually heat water to temperatures ranging from 150Âº to 200Âº F (66Âº to 93Âº C). The efficiency of flat plate collectors varies from manufacturer to manufacturer, and system to system, but usually ranges from as low as 20% to as high as 80%. Solar thermal power is one of the most promising ways to provide renewable energy, giving the fact that it can compete in the middle/long term with conventional power plants. As a result of international cooperation and government grants, many demonstration projects have been carried out or are still in progress. India supports development of both solar thermal and solar photovoltaics (PV) power generation. To demonstrate and commercialize solar thermal technology in India, MNES is promoting megawatt scale projects such as the proposed 35MW solar thermal plant in Rajasthan and is encouraging private sector projects by providing financial assistance from the Ministry. Involvement in the project of various players in the energy sector, such as local industries, the private construction and operations contractors, Rajasthan State Power Corporation Limited (RSPCL), Rajasthan State Electricity Board (RSEB), Rajasthan Energy Development Agency (REDA), Central Electricity Authority (CEA), MNES and others, will help to increase the capacity and capability of local 5technical expertise and further sustain the development of solar power in India in the longer term.

PROJECT AT A GLANCE

COST OF PROJECT				MEANS OF FINANCE
Particulars	Existing	Proposed	Total	Particulars	Existing	Proposed	Total
Land & Site Development Exp.	**********	**********	**********	Capital	**********	**********	**********
Buildings	**********	**********	**********	Share Premium	**********	**********	**********
Plant & Machineries	**********	**********	**********	Other Type Share Capital	**********	**********	**********
Motor Vehicles	**********	**********	**********	Reserves & Surplus	**********	**********	**********
Office Automation Equipments	**********	**********	**********	Cash Subsidy	**********	**********	**********
Technical Knowhow Fees & Exp.	**********	**********	**********	Internal Cash Accruals	**********	**********	**********
Franchise & Other Deposits	**********	**********	**********	Long/Medium Term Borrowings	**********	**********	**********
Preliminary& Pre-operative Exp	**********	**********	**********	Debentures / Bonds	**********	**********	**********
Provision for Contingencies	**********	**********	**********	Unsecured Loans/Deposits	**********	**********	**********
Margin Money - Working Capital	**********	**********	**********		**********	**********	**********
TOTAL	**********	**********	**********	TOTAL	**********	**********	**********

COST OF PROJECT

Particulars	Existing	Proposed	Total
C O S T O F P R O J E C T
Land & Site Development Exp.
Land Area Required	**********	**********	**********
Land Development Cost, Boundary Wall, Gate & Road etc.	**********	**********	**********
	**********	**********	**********
Buildings	**********	**********	**********
Factory Building -	**********	**********	**********
Office Buildings	**********	**********	**********
	**********	**********	**********
Plant & Machineries	**********	**********	**********
Indigenous Machineries	**********	**********	**********
Erection & Installation	**********	**********	**********
Laboratory Equipments	**********	**********	**********
Miscellaneous Equipments like pumps, valves, pipeline & fittings	**********	**********	**********
Imported Machineries	**********	**********	**********
Technical know how	**********	**********	**********
	**********	**********	**********
Office Vehicles	**********	**********	**********
Office Automation Equipments (Telephone/ Fax/ Computer)	**********	**********	**********
Office Equipment, Furniture plus Other Equipment & Accessories	**********	**********	**********
Other Misc. Assets	**********	**********	**********
Pre-operative & Preliminary Expenses	**********	**********	**********
Provision for Contingencies	**********	**********	**********
	**********	**********	**********
Total Capital Cost of Project	**********	**********	**********
Margin Money for Working Capital	**********	**********	**********
Total Cost of Project	**********	**********	**********

PROFITABILITY AND NET CASH ACCRUALS

Particulars	Operating Years
	1-2	2-3	3-4	4-5	5-6
	**********	**********	**********	**********	**********
Revenue/Income/Realisation	**********	**********	**********	**********	**********
Gross Sales Realisation	**********	**********	**********	**********	**********
Less : Excise Duties/Levies	**********	**********	**********	**********	**********
Net Sales Realisation	**********	**********	**********	**********	**********
Total Revenue/Income/Realisation	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
Expenses/Cost of Products/Services/Items	**********	**********	**********	**********	**********
Raw Material Cost	**********	**********	**********	**********	**********
Indigenous	**********	**********	**********	**********	**********
Total Nett Consumption	**********	**********	**********	**********	**********
Lab & ETP Chemical Cost	**********	**********	**********	**********	**********
Packing Material Cost	**********	**********	**********	**********	**********
Sub Total of Net Consumption	**********	**********	**********	**********	**********
Miscellaneous Cost	**********	**********	**********	**********	**********
Employees Expenses	**********	**********	**********	**********	**********
Fuel Expenses	**********	**********	**********	**********	**********
Power/Electricity Expenses	**********	**********	**********	**********	**********
Depreciation	**********	**********	**********	**********	**********
Royalty & Other Charges	**********	**********	**********	**********	**********
Repairs & Maintenance Exp.	**********	**********	**********	**********	**********
Other Mfg. Expenses	**********	**********	**********	**********	**********
Cost of Output of Goods Sold	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
Gross Profit	**********	**********	**********	**********	**********
Administration Expenses	**********	**********	**********	**********	**********
Technical Knowhow Fees & Exp.	**********	**********	**********	**********	**********
Financial Charges	**********	**********	**********	**********	**********
Long/Medium Term Borrowing	**********	**********	**********	**********	**********
On Wkg. Capital Borrowings	**********	**********	**********	**********	**********
Total Financial Charges	**********	**********	**********	**********	**********
Selling Expenses	**********	**********	**********	**********	**********
Total Cost of Sales	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
Net Profit Before Taxes	**********	**********	**********	**********	**********
Tax on Profit	**********	**********	**********	**********	**********
Net Profit After Taxes	**********	**********	**********	**********	**********
Depreciation Added Back	**********	**********	**********	**********	**********
Technical Knowhow Fees & Exp.	**********	**********	**********	**********	**********
Net Cash Accruals	**********	**********	**********	**********	**********

ASSSESSEMENT OF WORKING CAPITAL REQUIREMENTS

Particulars	Stk.Prd.	Stk.Prd.		Operating Years
	1st Year	2nd Yr&+		1-2	2-3	3-4	4-5	5-6
Capacity	Months	Months	%	**********	**********	**********	**********	**********
CURRENT ASSETS				**********	**********	**********	**********	**********
Stocks on Hand				**********	**********	**********	**********	**********
Raw Material Cost				**********	**********	**********	**********	**********
Indigenous	**********	**********	M	**********	**********	**********	**********	**********
Lab & ETP Chemical	**********	**********	M	**********	**********	**********	**********	**********
Packing Material	**********	**********	M	**********	**********	**********	**********	**********
Consumable Store	**********	**********	M	**********	**********	**********	**********	**********
Work-in-Process	**********	**********	D	**********	**********	**********	**********	**********
Finished Goods	**********	**********	M	**********	**********	**********	**********	**********
Current Expenses	**********	**********	M	**********	**********	**********	**********	**********
Receivables	**********	**********	M	**********	**********	**********	**********	**********
	**********	**********		**********	**********	**********	**********	**********
Total				**********	**********	**********	**********	**********
Cash/Bank Balances				**********	**********	**********	**********	**********
Gross Wkg. Capital				**********	**********	**********	**********	**********
				**********	**********	**********	**********	**********

PROFITABILITY RATIOS, DSCR, DEBT EQUITY

Particulars		Operating Years
		1-2	2-3	3-4	4-5	5-6

Profit Percentages to Net Sales
Gross Profit		**********	**********	**********	**********	**********
% Of G.P. to Net Sales		**********	**********	**********	**********	**********
Net Profit Before Taxes		**********	**********	**********	**********	**********
% of N.P.B.T. To Net Sales		**********	**********	**********	**********	**********
Net Profit After Taxes		**********	**********	**********	**********	**********
% of N.P.A.T. To Net Sales		**********	**********	**********	**********	**********

Debt Service Coverage Ratio
Funds Available to Service Debts
Net Profit After Taxes		**********	**********	**********	**********	**********
Depreciation Charges		**********	**********	**********	**********	**********
Technical Knowhow Fees & Exp		**********	**********	**********	**********	**********
Interest on Long/Medium Term		**********	**********	**********	**********	**********
T o t a l		**********	**********	**********	**********	**********
Debt Service Obligations
Repayment of Long/Medium Ter		**********	**********	**********	**********	**********
Interest on Long/Medium Term		**********	**********	**********	**********	**********
T o t a l		**********	**********	**********	**********	**********
		**********	**********	**********	**********	**********
D. S. C. R. (Individual)		**********	**********	**********	**********	**********
D. S. C. R. (Cumulative) .....		**********	**********	**********	**********	**********
D. S. C. R. (Overall) ........		**********	**********	**********	**********	**********

Parameters
Initial Equity Capital	**********	**********	**********	**********	**********	**********
Credit Balance in P & L	**********	**********	**********	**********	**********	**********
Total Capital excl Unsec Deposits	**********	**********	**********	**********	**********	**********
Unsecured Dep.	**********	**********	**********	**********	**********	**********
Total Equity incl Unsecured Deposits	**********	**********	**********	**********	**********	**********
Long/Medium Term Borrowings from Bank	**********	**********	**********	**********	**********	**********
Term lia. Incl Unsecured Deposit	**********	**********	**********	**********	**********	**********
Total Liabilities	**********	**********	**********	**********	**********	**********
Total Liabilities incl Unsecured Deposits	**********	**********	**********	**********	**********	**********
DEBT EQUITY RATIO considering
i.e.Total Term Lia./NW
Unsecured Dep. as Equity	**********	**********	**********	**********	**********	**********
Unsecured Dep. as Debt	**********	**********	**********	**********	**********	**********
Total Outside Lia./NW		**********	**********	**********	**********	**********
Assets Turnover Ratio (x)		**********	**********	**********	**********	**********

No. of Shares of 10.00 each		**********	**********	**********	**********	**********
Earnings Per Share (EPS) (in `)		**********	**********	**********	**********	**********
Proposed divident		**********	**********	**********	**********	**********
Cash EPS (in `)		**********	**********	**********	**********	**********
Dividend Per Share(DPS) (in `)		**********	**********	**********	**********	**********
Payout Ratio (%Age)		**********	**********	**********	**********	**********
Retained Earnings/Share (in `)		**********	**********	**********	**********	**********
Retained Earnings (%Age)		**********	**********	**********	**********	**********
Book Value Per Share (in `)		**********	**********	**********	**********	**********
Debt Per Share (in `)		**********	**********	**********	**********	**********
Probable Mkt.Price/Share(in `)		**********	**********	**********	**********	**********
Price / Book Value (x)		**********	**********	**********	**********	**********
Price Earnings Ratio (x)		**********	**********	**********	**********	**********
Yield (%Age)		**********	**********	**********	**********	**********

BREAK EVEN ANALYSIS

Particulars		Operating Years
	Ratio	1-2	2-3	3-4	4-5	5-6

BREAK EVEN ANALYSIS
Total Value of Output		**********	**********	**********	**********	**********

Variable Cost & Expenses
Raw Material Cost	**********	**********	**********	**********	**********	**********
Lab & ETP Chemical Cost	**********	**********	**********	**********	**********	**********
Packing Material Cost	**********	**********	**********	**********	**********	**********
Sales Commission/Exp.	**********	**********	**********	**********	**********	**********
Sub-total		**********	**********	**********	**********	**********
Less:W.I.P. Adjustments		**********	**********	**********	**********	**********
Total Variable Cost		**********	**********	**********	**********	**********
Net Contribution		**********	**********	**********	**********	**********
Profit Volume Ratio (%)		**********	**********	**********	**********	**********

Semi-Var./Semi-Fixed Exp.
Miscellaneous Cost	**********	**********	**********	**********	**********	**********
Employees Expenses	**********	**********	**********	**********	**********	**********
Power/Electricity Expen	**********	**********	**********	**********	**********	**********
Fuel Expenses	**********	**********	**********	**********	**********	**********
Royalty & Other Charges	**********	**********	**********	**********	**********	**********
Repairs & Maintenance E	**********	**********	**********	**********	**********	**********
Other Mfg. Expenses	**********	**********	**********	**********	**********	**********
Administration Expenses	**********	**********	**********	**********	**********	**********
Selling Expenses	**********	**********	**********	**********	**********	**********
Interest on Wkg.Capital	**********	**********	**********	**********	**********	**********
Tot.Semi-Var./Fixed Exp.		**********	**********	**********	**********	**********
		**********
Fixed Expenses / Cost		**********
Miscellaneous Cost	**********	**********	**********	**********	**********	**********
Employees Expenses	**********	**********	**********	**********	**********	**********
Power/Electricity Expen	**********	**********	**********	**********	**********	**********
Fuel Expenses	**********	**********	**********	**********	**********	**********
Royalty & Other Charges	**********	**********	**********	**********	**********	**********
Repairs & Maintenance E	**********	**********	**********	**********	**********	**********
Other Mfg. Expenses	**********	**********	**********	**********	**********	**********
Administration Expenses	**********	**********	**********	**********	**********	**********
Selling Expenses	**********	**********	**********	**********	**********	**********
Intrest-Fixed Borrowing	**********	**********	**********	**********	**********	**********
Intrest-Working Capital	**********	**********	**********	**********	**********	**********
Depreciation Charges	**********	**********	**********	**********	**********	**********
Deferred Expenses W/Off	**********	**********	**********	**********	**********	**********
Total Fixed Expenses		**********	**********	**********	**********	**********
Tot.Fixed/Semi-Fixed Exp		**********	**********	**********	**********	**********
Tot.Cash Fixed/SemiFixed		**********	**********	**********	**********	**********

Cash Break Even Sales		**********	**********	**********	**********	**********
Cash Margin of Safety		**********	**********	**********	**********	**********
Break Even Sales		**********	**********	**********	**********	**********
Margin of safety		**********	**********	**********	**********	**********

At Maximum Utilisation :	Year	**********	**********	**********	**********	**********
(as % of Installed Capacity)
Cash B.E.P. :	%	xx%	xx%	xx%	xx%	xx%
B.E.P. :	%	xx%	xx%	xx%	xx%	xx%

M E A N S O F F I N A N C E

Equity Share Capital	**********	**********	**********
Others - Preference Share Capital	**********	**********	**********
Total Equity Share Capital	**********	**********	**********
	**********	**********	**********
Long/Medium Term Borrowings	**********	**********	**********
FROM BANK	**********	**********	**********
From Other Financial Institutions	**********	**********	**********
Total Long/Medium Term Borrowings	**********	**********	**********
	**********	**********	**********
Total Means of Finance	**********	**********	**********

INTEREST AND REPAYMENT ON TERM LOANS

A	Name of Institution-Bank	ABC BANK
B	Term Borrowing Amount	**********	xx
C	Repayment Term (Years)	**********	Years
D	Repayment Instalments	**********	Instalments
E	Repayment Commencement	Year - 0; 3rd Qtr.
F	Rate of Interest(General)	xxxx%	p.a.
F	Rate of Interest(Initial)	0.00%	p.a.
G	Apply Gen. Int. Rate from Year	x Quarter :: x
H	Interest Calculation	Quarterly

Debt Service Coverage Ratio

Funds Available to Service Debts
Net Profit After Taxes	**********	**********	**********	**********	**********
Depreciation Charges	**********	**********	**********	**********	**********
Technical Knowhow Fees & Expenses	**********	**********	**********	**********	**********
Interest on Long/Medium Term	**********	**********	**********	**********	**********
T o t a l	**********	**********	**********	**********	**********
Debt Service Obligations	**********	**********	**********	**********	**********
Repayment of Long/Medium Term	**********	**********	**********	**********	**********
Interest on Long/Medium Term	**********	**********	**********	**********	**********
T o t a l	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
D. S. C. R. (Individual)	**********	**********	**********	**********	**********
D. S. C. R. (Cumulative) .....	**********	**********	**********	**********	**********
D. S. C. R. (Overall) ........	**********	**********	**********	**********	**********

DEPRECIATION CHARGES AS PER BOOKS (TOTAL)

Operating Year	F.Assets Type A-1	F.Assets Type A-2	F.Assets Type B	F.Assets Type C	F.Assets Type D-1	F.Assets Type D-2	Total
Particulars	Factory Building -	Office Buildings	PLANT & MACHINERY	Office Vehicles	Office Automation Equipments (Telephone/ Fax/ Computer)	Furniture & Fixtures
1-2	**********	**********	**********	**********	**********	**********	**********
2-3	**********	**********	**********	**********	**********	**********	**********
3-4	**********	**********	**********	**********	**********	**********	**********
4-5	**********	**********	**********	**********	**********	**********	**********
5-6	**********	**********	**********	**********	**********	**********	**********
Particulars	Method	Deprn.Rate	Part Consideration (for Asset put to use less than xx months)
Type A :: Buildings
Factory Building -	WDV	**********	**********
Office Buildings	WDV	**********	**********
Type C
Office Vehicles	WDV	**********	**********
Type D :: Misc. Fixed Assets
Office Automation Equipments (Telephone/ Fax/ Computer)	WDV	**********	**********
Furniture & Fixtures	WDV	**********	**********

Projected Pay Back Period

Particulars	Operating Years
	1-2	2-3	3-4	4-5	5-6
Year	1	2	3	4	5
Initial Investment	*********
Total Initial Investment	*********
Yearly Cash Flow	*********	*********	*********	*********	*********
Accumulated Cash Flow	*********	*********	*********	*********	*********
Pay Back Period	xx Years xx Months		xx Years xx months

Projected IRR

Year	CFAT	PV factor @%**	*********
Initial Investment	*********	*********	*********
1-2	*********	*********	*********
2-3	*********	*********	*********
3-4	*********	*********	*********
4-5	*********	*********	*********
5-6	*********	*********	*********
Total PV	*********		*********
IRR	*********		*********

PROJECTED BALANCE SHEET

Particulars	Operating Years
	1-2	2-3	3-4	4-5	5-6

Equity Share Capital	**********	**********	**********	**********	**********
Surplus of Previous Year	**********	**********	**********	**********	**********
Add : Net Profit After Taxes	**********	**********	**********	**********	**********
Surplus at the End of Year	**********	**********	**********	**********	**********
Unsecured Deposits	**********	**********	**********	**********	**********
Long/Medium Term Borrowings Proposed-FROM BANK	**********	**********	**********	**********	**********
Bank Borrowing for Wkg. Capital	**********	**********	**********	**********	**********
Current Liabilities	**********	**********	**********	**********	**********
Sundry Creditors	**********	**********	**********	**********	**********
Other Current Liabilities	**********	**********	**********	**********	**********
Total Current Liabilities	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
Total of Liabilities	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
A S S E T S	**********	**********	**********	**********	**********
Fixed Assets	**********	**********	**********	**********	**********
Gross Block	**********	**********	**********	**********	**********
Less : Depreciation to Date	**********	**********	**********	**********	**********
Net Block	**********	**********	**********	**********	**********
Current Assets	**********	**********	**********	**********	**********
Stocks on Hand	**********	**********	**********	**********	**********
Receivables	**********	**********	**********	**********	**********
Other Current Assets	**********	**********	**********	**********	**********
Cash and Bank Balances	**********	**********	**********	**********	**********
Total Current Assets	**********	**********	**********	**********	**********
P & P Exp. and/or Other Dvp.Exp.	**********	**********	**********	**********	**********
(To The Extent Not W/Off)	**********	**********	**********	**********	**********
Other Non Current Assets	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
Total of Assets	**********	**********	**********	**********	**********
	**********	**********	**********	**********	**********
ROI (Average of Fixed Assets)	**********	**********	**********	**********	**********
RONW (Average of Share Capital)	**********	**********	**********	**********	**********
ROI (Average of Total Assets)	**********	**********	**********	**********	**********

COMPANY SUMMARY

NIIR PROJECT CONSULTANCY SERVICES (NPCS)is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

REASONS FOR BUYING THE REPORT

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.
This report provides vital information on the product like its definition, characteristics and segmentation.
This report helps you market and place the product correctly by identifying the target customer group of the product.
This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.
The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.

OUR APPROACH

Our research reports broadly cover Indian markets, present analysis, outlook and forecast.
The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players.
We use reliable sources of information and databases. And information from such sources is processed by us and included in the report.

TABLE OF CONTENT

Introduction
Project Introduction
Project Objective and Strategy
Concise History of the Product
Properties
BIS (Bureau of Indian Standards) Provision & Specification
Uses & Applications

Market Study and Assessment
Current Indian Market Scenario
Present Market Demand and Supply
Estimated Future Market Demand and Forecast
Statistics of Import & Export
Names & Addresses of Existing Units (Present Players)
Market Opportunity

Raw Material
List of Raw Materials
Properties of Raw Materials
Prescribed Quality of Raw Materials
List of Suppliers and Manufacturers

Personnel (Manpower) Requirements
Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel

Plant and Machinery
List of Plant & Machinery
Miscellaneous Items
Appliances & Equipments
Laboratory Equipments & Accessories
Electrification
Electric Load & Water
Maintenance Cost
Sources of Plant & Machinery (Suppliers and Manufacturers)

Manufacturing Process and Formulations
Detailed Process of Manufacture with Formulation
Packaging Required
Process Flow Sheet Diagram

Infrastructure and Utilities
Project Location
Requirement of Land Area
Rates of the Land
Built Up Area
Construction Schedule
Plant Layout and Requirement of Utilities

FINANCIAL PLAN

Assumptions for Profitability workings	Plant Economics
Production Schedule
Land & Building Factory Land & Building Site Development Expenses
Plant & Machinery Indigenous Machineries Other Machineries (Miscellaneous, Laboratory etc.)
Other Fixed Assets Furniture & Fixtures Pre-operative and Preliminary Expenses Technical Knowhow Provision of Contingencies
Working Capital Requirement Per Month Raw Material Packing Material Lab & ETP Chemical Cost Consumable Store
Overheads Required Per Month And Per Annum Utilities & Overheads (Power, Water and Fuel Expenses etc.) Royalty and Other Charges Selling and Distribution Expenses
Salary and Wages	Turnover Per Annum
Share Capital Equity Capital Preference Share Capital
Annexure 1:: Cost of Project and Means of Finance
Annexure 2:: Profitability and Net Cash Accruals Revenue/Income/Realisation Expenses/Cost of Products/Services/Items Gross Profit Financial Charges Total Cost of Sales Net Profit After Taxes Net Cash Accruals
Annexure 3 :: Assessment of Working Capital requirements Current Assets Gross Working. Capital Current Liabilities Net Working Capital Working Note for Calculation of Work-in-process
Annexure 4 :: Sources and Disposition of Funds
Annexure 5 :: Projected Balance Sheets ROI (Average of Fixed Assets) RONW (Average of Share Capital) ROI (Average of Total Assets)
Annexure 6 :: Profitability ratios D.S.C.R Earnings Per Share (EPS) Debt Equity Ratio
Annexure 7 :: Break-Even Analysis Variable Cost & Expenses Semi-Var./Semi-Fixed Exp. Profit Volume Ratio (PVR) Fixed Expenses / Cost B.E.P
Annexure 8 to 11:: Sensitivity Analysis-Price/Volume Resultant N.P.B.T Resultant D.S.C.R Resultant PV Ratio Resultant DER Resultant ROI Resultant BEP
Annexure 12 :: Shareholding Pattern and Stake Status Equity Capital Preference Share Capital
Annexure 13 :: Quantitative Details-Output/Sales/Stocks Determined Capacity P.A of Products/Services Achievable Efficiency/Yield % of Products/Services/Items Net Usable Load/Capacity of Products/Services/Items Expected Sales/ Revenue/ Income of Products/ Services/ Items
Annexure 14 :: Product wise domestic Sales Realisation	Annexure 15 :: Total Raw Material Cost
Annexure 16 :: Raw Material Cost per unit	Annexure 17 :: Total Lab & ETP Chemical Cost
Annexure 18 :: Consumables, Store etc.,	Annexure 19 :: Packing Material Cost
Annexure 20 :: Packing Material Cost Per Unit	Annexure 21 :: Employees Expenses
Annexure 22 :: Fuel Expenses	Annexure 23 :: Power/Electricity Expenses
Annexure 24 :: Royalty & Other Charges	Annexure 25 :: Repairs & Maintenance Exp.
Annexure 26 :: Other Mfg. Expenses	Annexure 27 :: Administration Expenses
Annexure 28 :: Selling Expenses	Annexure 29 :: Depreciation Charges – as per Books (Total)
Annexure 30 :: Depreciation Charges – as per Books (P & M)	Annexure 31 :: Depreciation Charges - As per IT Act WDV (Total)
Annexure 32 :: Depreciation Charges - As per IT Act WDV (P & M)	Annexure 33 :: Interest and Repayment - Term Loans
Annexure 34 :: Tax on Profits	Annexure 35 ::Projected Pay-Back Period And IRR

INFORMATION/ DISCLAIMER

One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
One Crore is equivalent to ten million (10,000,000)
T.C.I is Total Capital Investment
We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.
Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

GOOD FUTURE PROSPECTS FOR SOLAR THERMAL POWER PLANT

Add to Inquiry Basket Download Page as PDF.
Capacity	0	Plant and Machinery cost	0.00 Lakhs
Working Capital	0.00	Rate of Return (ROR)	0.00 %
Break Even Point (BEP)	0.00 %	TCI	0.00 Lakhs
Cost of Project	0.00Lakhs

ABOUT NPCS

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

And before diversifying/venturing into any product, wish to study the following aspects of the identified product:

Good Present/Future Demand
Export-Import Market Potential
Raw Material & Manpower Availability
Project Costs and Payback Period

We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

Reasons for buying the report:

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.
This report provides vital information on the product like its definition, characteristics and segmentation.
This report helps you market and place the product correctly by identifying the target customer group of the product.
This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.
The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.

The report contains all the data which will help an entrepreneur find answers to questions like:

Why I should invest in this project?
What will drive the growth of the product?
What are the costs involved?
What will be the market potential?

The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product. The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.

Our Approach:

Our research reports broadly cover Indian markets, present analysis, outlook and forecast.
The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players.
We use reliable sources of information and databases. And information from such sources is processed by us and included in the report.

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

Introduction

Project Introduction
Project Objective and Strategy
Concise History of the Product
Properties
BIS (Bureau of Indian Standards) Provision & Specification
Uses & Applications

Market Study and Assessment

Current Indian Market Scenario
Present Market Demand and Supply
Estimated Future Market Demand and Forecast
Statistics of Import & Export
Names & Addresses of Existing Units (Present Players)
Market Opportunity

Raw Material

List of Raw Materials
Properties of Raw Materials
Prescribed Quality of Raw Materials
List of Suppliers and Manufacturers

Personnel (Manpower) Requirements

Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel

Plant and Machinery

List of Plant & Machinery
Miscellaneous Items
Appliances & Equipments
Laboratory Equipments & Accessories
Electrification
Electric Load & Water
Maintenance Cost
Sources of Plant & Machinery (Suppliers and Manufacturers)

Manufacturing Process and Formulations

Detailed Process of Manufacture with Formulation
Packaging Required
Process Flow Sheet Diagram

Infrastructure and Utilities

Project Location
Requirement of Land Area
Rates of the Land
Built Up Area
Construction Schedule
Plant Layout and Requirement of Utilities

Project at a Glance

Assumptions for Profitability workings	Plant Economics
Production Schedule
Land & Building Factory Land & Building Site Development Expenses
Plant & Machinery Indigenous Machineries Other Machineries (Miscellaneous, Laboratory etc.)
Other Fixed Assets Furniture & Fixtures Pre-operative and Preliminary Expenses Technical Knowhow Provision of Contingencies
Working Capital Requirement Per Month Raw Material Packing Material Lab & ETP Chemical Cost Consumable Store
Overheads Required Per Month And Per Annum Utilities & Overheads (Power, Water and Fuel Expenses etc.) Royalty and Other Charges Selling and Distribution Expenses
Salary and Wages	Turnover Per Annum
Share Capital Equity Capital Preference Share Capital
Annexure 1:: Cost of Project and Means of Finance
Annexure 2:: Profitability and Net Cash Accruals Revenue/Income/Realisation Expenses/Cost of Products/Services/Items Gross Profit Financial Charges Total Cost of Sales Net Profit After Taxes Net Cash Accruals
Annexure 3 :: Assessment of Working Capital requirements Current Assets Gross Working. Capital Current Liabilities Net Working Capital Working Note for Calculation of Work-in-process
Annexure 4 :: Sources and Disposition of Funds
Annexure 5 :: Projected Balance Sheets ROI (Average of Fixed Assets) RONW (Average of Share Capital) ROI (Average of Total Assets)
Annexure 6 :: Profitability ratios D.S.C.R Earnings Per Share (EPS) Debt Equity Ratio
Annexure 7 :: Break-Even Analysis Variable Cost & Expenses Semi-Var./Semi-Fixed Exp. Profit Volume Ratio (PVR) Fixed Expenses / Cost B.E.P
Annexure 8 to 11:: Sensitivity Analysis-Price/Volume Resultant N.P.B.T Resultant D.S.C.R Resultant PV Ratio Resultant DER Resultant ROI Resultant BEP
Annexure 12 :: Shareholding Pattern and Stake Status Equity Capital Preference Share Capital
Annexure 13 :: Quantitative Details-Output/Sales/Stocks Determined Capacity P.A of Products/Services Achievable Efficiency/Yield % of Products/Services/Items Net Usable Load/Capacity of Products/Services/Items Expected Sales/ Revenue/ Income of Products/ Services/ Items
Annexure 14 :: Product wise domestic Sales Realisation	Annexure 15 :: Total Raw Material Cost
Annexure 16 :: Raw Material Cost per unit	Annexure 17 :: Total Lab & ETP Chemical Cost
Annexure 18 :: Consumables, Store etc.,	Annexure 19 :: Packing Material Cost
Annexure 20 :: Packing Material Cost Per Unit	Annexure 21 :: Employees Expenses
Annexure 22 :: Fuel Expenses	Annexure 23 :: Power/Electricity Expenses
Annexure 24 :: Royalty & Other Charges	Annexure 25 :: Repairs & Maintenance Exp.
Annexure 26 :: Other Mfg. Expenses	Annexure 27 :: Administration Expenses
Annexure 28 :: Selling Expenses	Annexure 29 :: Depreciation Charges – as per Books (Total)
Annexure 30 :: Depreciation Charges – as per Books (P & M)	Annexure 31 :: Depreciation Charges - As per IT Act WDV (Total)
Annexure 32 :: Depreciation Charges - As per IT Act WDV (P & M)	Annexure 33 :: Interest and Repayment - Term Loans
Annexure 34 :: Tax on Profits	Annexure 35 ::Projected Pay-Back Period And IRR